Work process: from drawing to finished tabletop
The most important steps in a typical stone technician object
A good stone job is carefully planned before cutting. Because an error cannot be corrected the early steps are the most important.
§1. Understand the drawing
- 01PLACEHOLDER_40
- 02Check where there should be sink, cooktop, and other
- 03Clarify which stone and surface the customer wants
§2. Mål op
- 01Measure carefully — preferably several times
- 02Be aware of corners that are not quite straight
- 03Note all dimensions clearly before proceeding
§3. Cut and work the material
- 01Cut the workpiece to size with saw and milling machine
- 02Make and check one complete part before the series is set in motion. If approved, the series is released; if a deviation is found, the setup or program is corrected, and a new first part is made. It's the cheapest quality control that exists.
- 03Shape the edges as desired
- 04Sand and polish the surface to the right finish
§4. Assemble
- 01Transport piece safely — it is heavy and fragile
- 02Place it so it sits precisely and firmly
- 03Check result with customer