Skip to content
Templates·Greenkeeper·Documentation

Control form: Inspection of irrigation system

Systematic review of pump, pipe network, sprinklers and control

Use the form at regular inspection of the irrigation system — e.g. weekly during the season. Fill in the master data, review the points and note all deviations in the follow-up table at the bottom so nothing is forgotten.

§Master data

FieldTo be filled in.
Facility/field
Date
Performed by.
Water meter reading (m³)
Weather since last (rainfall mm)

§Pump station

  • 01☐ Operating pressure normal — no fluctuations or alarms in control
  • 02☐ No leaks at pump, joints or valves
  • 03☐ Filters checked and cleaned as needed
  • 04☐ No abnormal noises or vibrations
  • 05☐ Water source/basin: level and inlet in order

§Sprinklers and sections

Section/areaRotation and extension OKNozzle/spray pattern ok.PLACEHOLDER_110Note
Greens are mowed to a few millimetres to provide a fast, even surface — tees, fairways and rough are mowed progressively higher.
Greens — hul 10-18
Tee locations
Fairways.
Other areas

§Steering and sensors

  • 01☐ Programmes match current care plan and weather forecast
  • 02☐ Rain stop/sensor switch tested and active
  • 03☐ Soil moisture sensors read — values entered in watering log
  • 04☐ Weather station delivers data (precipitation, temperature, wind)
  • 05☐ All sections manually test-run since last inspection

§Seasonal tasks

  • 01☐ Spring: system refilled slowly, all sections rinsed and tested
  • 02☐ Spring: nozzles and filters cleaned after winter
  • 03☐ Autumn: system emptied/blown out with air — frost protection carried out and documented
  • 04☐ Autumn: pump station winterised according to supplier's instructions

§Follow-up

Fejl/afvigelseAgreed actionResponsibleDeadlinePerformed.