Tools & product range.
The tools, equipment and materials the trade uses. Prices are indicative market prices with source — always check the current price with the retailer.
Machines
HVLP paint spray gun~ 279–599 krIndicative · HC Farver · 2026-06
Spray gun kit (several guns + case)~ 1.559–2.075 krIndicative · HC Farver · 2026-06
Random orbital sander~ 2.700–3.600 krIndicative · HC Farver (Mirka PROS, trykluft) · 2026-06
Water and oil filter for compressed air~ 115–155 krIndicative · HC Farver · 2026-06
Polishing machine (random orbital)~ 585–945 krIndicative · PriceRunner/tectake.dk · 2026-07
Infrared drying lamp~ ~9.598 kr (3-lampe-sæt, 2200 W, inkl. moms)Indicative · SparKøb · 2026-07
UV lamp for spot repair~ 1.250–1.800 krIndicative · Lakgruppen (Scangrip/Carsystem) · 2026-07
Hand tools
Mixing cups and paint strainers~ ~5 kr/stkIndicative · HC Farver · 2026-06
Filler spatula setUsed to spread polyester body filler evenly over the damage in thin layers and shape it to the curve of the bodywork before it is sanded down.
Colour chart (fan deck)Used to check a colour mix visually against the car's actual paint in daylight before spraying — especially important on sun-faded or older cars, where the official colour code no longer matches perfectly.
Materials
Sandpaper / sanding discsConsumable for sanding filler, sanding between primer coats and fine sanding before lacquering; grit is chosen by process step.
Masking tape (crepe tape)~ fra ~26 kr/rulleIndicative · Lakgruppen · 2026-06
Masking paper / masking film~ ~90–639 krIndicative · Lakgruppen · 2026-06
Polyester filler~ ~210–262 krIndicative · Lakgruppen · 2026-06
2K clear coat~ 149–336 krIndicative · Lakgruppen / BN Farver · 2026-06
Polishing compound and polishing wheelsUsed step by step after painting to remove sanding marks and achieve the final gloss — coarse compound for correction, fine polish for the final high-gloss finish.
Silicone remover / degreaser~ 65–160 kr (0,5–5 L)Indicative · Lakgruppen · 2026-07
Tack cloth (tack rag)Wiped over the surface immediately before painting/clearcoat to remove the last dust particles after sanding and blowing off, so they don't bake into the wet paint.
Cabin filter (intake/extraction)Replaced regularly to keep the booth's airflow and air velocity at the required level and avoid dust/lint in the fresh paint.
Safety equipment
Full-face mask with A2P3 combination filter~ ~250–1.700 krIndicative · Lakgruppen / HC Farver (halvmaske-sæt til helmaske m. filter) · 2026-06
Disposable painter's overalls and paint glovesProtects skin and clothing against lacquer, hardener and solvents while keeping lint and dust away from the wet lacquer surface.
Measuring tool
Digital mixing scale for colour tintingUsed to mix tinted car paint colours accurately to the manufacturer's weight-based formula, so the colour can be reproduced identically next time.