Work environment safety and ergonomics in depth
Heat, noise, chemistry and the body – how you take care of yourself in production
The plastics trade is not a licensed trade like electrical or plumbing but is surrounded by regulations on machine safety chemistry and working environment. Here we look at the journeyman certificate as your trade key the courses you typically need and the responsibility that comes with operating large machines.
§Heat and combustion
Plastic melts at high temperatures and both nozzles, tools and the finished workpiece can be burning hot. The most common injury in the trade is burns. Use gloves designed for heat let the machine cool before entering it and be especially careful when cleaning or changing tools. A nozzle that looks cool can still be well above boiling point.
§Clamping and machine forces
A voltage tester should always be tested both before and after it is used to check de-energization — otherwise you cannot trust the result.
§Noise and hearing
Many plastic halls are noisy: machines ventilation granulate being sucked and items falling. Persistent noise is insidious because hearing damage comes slowly and cannot be reversed. Use hearing protection where required and put it on in time — not first when your ears ring.
§Chemistry, smoke and ventilation
When plastic is heated, smoke and vapor can be released, and some materials and additives must be handled carefully. Extraction at the machine and during finishing is your friend—use it and don't shut it off for quiet. Follow the safety data sheet for the materials you work with and use the protective equipment it prescribes.
§Ergonomics and the body in the long run.
The craft contains many repetitive movements, lifting of material, and periods standing up. This is where wear injuries build up over years if you're not careful. Think in good technique from the start.
- 01PLACEHOLDER_109
- 02Change position and use variation, so the same joints aren't strained hour after hour.
- 03Arrange the workplace so that what you use most is at a good height and reach.
- 04Say if a task hurts – it is cheaper to change the work process than to wear out a shoulder.
§The safe culture
The best work environment arises where it is completely normal to speak up if something is unsafe and where newcomers are trained properly before standing alone at a machine. As an apprentice you have the right to thorough training — and the duty to ask if you are unsure. No production is so busy that it is worth a finger or a broken bone.
“The skilled plastic moulder is not the one who works fastest despite safety – but the one who works fast because the routines are so safe that nothing needs to be redone.”