Checklist: preparation of car for periodic inspection
Systematic inspection before the car is presented for inspection
Use the checklist from end to end at each inspection preparation, and tick or note errors for each point. Remember: cars must undergo periodic inspection for the first time 4 years after first registration and then every 2 years.
§1. Cabin and external functions
- 01Horn works.
- 02All safety harnesses roll out, lock with a jerk, and lock in the fitting.
- 03Warning lights: no active fault lights (engine control, ABS, airbag) after startup.
- 04Wipers and washers work; wiper blades without streaks.
- 05Mirrors and/or cameras (blind spot): adjustment OK, no cracks.
- 06Number plates intact, legible and correctly mounted.
§2. Lights and sign painting
- 01Dipped beam, high beam, position light, rear lights, number plate light – all bulbs work.
- 02Brake lights (all including the high) and reversing lights work.
- 03Indicator lights and hazard lights work all the way around.
- 04Fog lights front/rear work and indicator light lights up.
- 05Lantern setting checked with lantern adjustment apparatus and adjusted.
§3. Brakes
- 01Brake test on roll stand: braking effect and skewed traction within limits.
- 02Parking brake: function and drift in order.
- 03Brake discs/drums and blocks: wear and rust assessed at all wheels.
- 04Brake hoses and pipes: no cracks tarnishing or leaks.
- 05Brake fluid: level and age/boiling point checked.
§4. Steering, undercarriage and tyres
- 01Haze control on lift: guide balls, bearing balls, tie-rod ends and bushings.
- 02Shock absorbers: no leakage, effect assessed.
- 03Springs: no breaks.
- 04Seals on steering components and drive axles all.
- 05Pattern depth measured in several tracks on all tires — legal requirement minimum 1.6 mm.
- 06Tires without damage, age cracks, or abnormal wear pattern; tire pressure adjusted.
§5. Engine, exhaust and bottom
- 01Exhaust tight and securely suspended.
- 02No significant oil or fluid leaks.
- 03Bodywork's load-bearing parts and panels checked for corrosion.
- 04No sharp edges or loose parts under the vehicle.
- 05Check engine light off, and any fixed faults verified by test drive — not just cleared.